Code:
- ES-01
ES-01 FIRE BOOTS
Color: Black + Yellow
Material: Rubber Sole
Weight: 2.8kg/pair
Bottom of steel plate resistance: ≥5000V;
Heel energy absorption: design to minimize heel impact
- Flame retardant rubber outsole
- Fuel oil resistant sole
- Slip resistant vulcanized rubber outsole
- Cold insulation sole construction
Description
Reviews (0)
Related products
ES-05 FIRE SUIT
Color: Black
Material: Polyester
Reflector: Yellow + Silver
- Flashlight hooks on the right, one radio pocket on left chest, two big patch pocket
- Elasticated braces with quick release buckles, two pockets both of trousers
- Drainage hole for all bottom pockets High collar fully lined, reinforced at elbow, knee.
ES-08A SILICONE MASK SINGLE
Gas Mask Type: Single filter mask
Sizes: One size fits all, adjustable
- • Combining human face features with design, nose cup tight fit with the face
- • Wide field of vision, the vision rate reaches above 91%
- • Inflaming retarding silicone for excellent soft, comfort and resistance to aging
- • Threaded fittings make gas mask easy to connect with canister or breathing hose
- • Four-point harness type
ES-12 (2,4,8,16 ZONE) CONVENTIONAL FIRE ALARM PANEL
Parameters: 37 x 44 x 10 cm
AC Power: 90 to 270VAC, 50Hz/60Hz
Power Supply Rating: 3 Amps @ 24VDC
Standby Detector: 4mA maximum
Maximum Detector: 30 detectors
Fault Relay Rating: 2A & 30VAC, resistive
Alarm Relay Rating: 2A & 30VAC, resistive
Features: Built-in alarm horn, easy to install and expand, long term usage, built-in imported chips for more stable and durable
• Two, four, eight, sixteen zone style B (Class B) initiating device circuits (IDCs), all zones accept two-wire smoke detectors and any normally-open contact devices.
• Two supervisory Input with DC12V output, ideal to connect security alarm devices.
• Three general alarm, trouble and supervisory, form a relay output.
• One, two, four built-in sound output, style Y (Class B) notification appliance (Signal) circuits (NACs), NACs may be programmed: Silenceable or non-silenceable.
• 3.0 amps of total system power. Resettable DC24V & non- resettable DC24V output.
• Zone input short circuit can be set to “Alarm” or “Fault” mode.
• RS485 Communication port (optional).
• Automatic/Manual mode can be programmed.
• Disable/Enable control per zone (IDC) can be programmed.
• Disable/Enable sound output(NACs) can be programmed.
ES-21 HEAT ALARM
Color: White
Operating Voltage: DC:9V-35V
Standby Current: 55uA
Alarm Indication: Red LED
Alarm current: 105±3dB
Reset: Power off or auto reset
Alarm Point: 57°C (135°F)
- SMT adopted, High stability, Low standby current, Anti-RFI & Anti-EMI 9-35VDC Voltage, Duel LED for 360 visual, Flashing LED power indicator
Reviews
There are no reviews yet.