Code:
- ES-11C
ES-11C FIRE BLANKET
Sizes: 1.2 x 1.8 (meter)
Material: 100% Fiberglass fabric
Service Temperature: Above 550°C
Thickness: 0.43mm
- It is widely used in corporation, supermarket, shipping, car and house etc, especially use in kitchen, hotel, recreation ground, gas station etc that can easy to be on fire area
Description
Reviews (0)
Related products
ES-12 (2,4,8,16 ZONE) CONVENTIONAL FIRE ALARM PANEL
Parameters: 37 x 44 x 10 cm
AC Power: 90 to 270VAC, 50Hz/60Hz
Power Supply Rating: 3 Amps @ 24VDC
Standby Detector: 4mA maximum
Maximum Detector: 30 detectors
Fault Relay Rating: 2A & 30VAC, resistive
Alarm Relay Rating: 2A & 30VAC, resistive
Features: Built-in alarm horn, easy to install and expand, long term usage, built-in imported chips for more stable and durable
• Two, four, eight, sixteen zone style B (Class B) initiating device circuits (IDCs), all zones accept two-wire smoke detectors and any normally-open contact devices.
• Two supervisory Input with DC12V output, ideal to connect security alarm devices.
• Three general alarm, trouble and supervisory, form a relay output.
• One, two, four built-in sound output, style Y (Class B) notification appliance (Signal) circuits (NACs), NACs may be programmed: Silenceable or non-silenceable.
• 3.0 amps of total system power. Resettable DC24V & non- resettable DC24V output.
• Zone input short circuit can be set to “Alarm” or “Fault” mode.
• RS485 Communication port (optional).
• Automatic/Manual mode can be programmed.
• Disable/Enable control per zone (IDC) can be programmed.
• Disable/Enable sound output(NACs) can be programmed.
ES-13 HANDLE ALARM
Color: Red
Material: ABS plastic
Sizes: 140 x 104 x 45 (mm)
Operating Voltage: 9-28VDC Volts
Weight: 220g
Operating Temperature Range: -10°C to 50°C (14F to 122F)
- The conventional manual call point designed for conventional fire alarm system for reporting fire or emergency condition by its push in/pull down
ES-14 A-B FIRE ALARM BELL
Color: Red
Material: Aluminum alloy
Sizes: 15cm (6 inch)
Sound Pressure: 96dB
Operating Current: 25mA
Rated Voltage: DC 12V/24V/AC 220V
Driving Way: Motor
- A fire alarm is an electronic sounder or a bell. The alarm makes a loud, high pitched sound to notify people that there is a fire in the building
ES-20 SMOKE DETECTOR SD-604PC
Color: White
Operating Voltage: DC:9V-35V
Standby Current: 55uA
Alarm Indication: Red LED
Alarm Current: 105±3dB
Reset: Power off or auto reset
Sensitivity: 0.5db/m
- SMT adopted, High stability, Low standby current, Anti-RFI & Anti-EMI 9-35VDC Voltage, Duel LED for 360 visual, Flashing LED power indicator
ES-21 HEAT ALARM
Color: White
Operating Voltage: DC:9V-35V
Standby Current: 55uA
Alarm Indication: Red LED
Alarm current: 105±3dB
Reset: Power off or auto reset
Alarm Point: 57°C (135°F)
- SMT adopted, High stability, Low standby current, Anti-RFI & Anti-EMI 9-35VDC Voltage, Duel LED for 360 visual, Flashing LED power indicator
Reviews
There are no reviews yet.