Code:
- ES-11A
ES-11A FIRE BLANKET
Sizes: 1.0 x 1.0 (meter)
Material: 100% Fiberglass fabric
Service Temperature: Above 550°C
Thickness: 0.43mm
- It is widely used in corporation, supermarket, shipping, car and house etc, especially use in kitchen, hotel, recreation ground, gas station etc that can easy to be on fire area
Description
Reviews (0)
Related products
ES-05 FIRE SUIT
Color: Black
Material: Polyester
Reflector: Yellow + Silver
- Flashlight hooks on the right, one radio pocket on left chest, two big patch pocket
- Elasticated braces with quick release buckles, two pockets both of trousers
- Drainage hole for all bottom pockets High collar fully lined, reinforced at elbow, knee.
ES-12 (2,4,8,16 ZONE) CONVENTIONAL FIRE ALARM PANEL
Parameters: 37 x 44 x 10 cm
AC Power: 90 to 270VAC, 50Hz/60Hz
Power Supply Rating: 3 Amps @ 24VDC
Standby Detector: 4mA maximum
Maximum Detector: 30 detectors
Fault Relay Rating: 2A & 30VAC, resistive
Alarm Relay Rating: 2A & 30VAC, resistive
Features: Built-in alarm horn, easy to install and expand, long term usage, built-in imported chips for more stable and durable
• Two, four, eight, sixteen zone style B (Class B) initiating device circuits (IDCs), all zones accept two-wire smoke detectors and any normally-open contact devices.
• Two supervisory Input with DC12V output, ideal to connect security alarm devices.
• Three general alarm, trouble and supervisory, form a relay output.
• One, two, four built-in sound output, style Y (Class B) notification appliance (Signal) circuits (NACs), NACs may be programmed: Silenceable or non-silenceable.
• 3.0 amps of total system power. Resettable DC24V & non- resettable DC24V output.
• Zone input short circuit can be set to “Alarm” or “Fault” mode.
• RS485 Communication port (optional).
• Automatic/Manual mode can be programmed.
• Disable/Enable control per zone (IDC) can be programmed.
• Disable/Enable sound output(NACs) can be programmed.
Reviews
There are no reviews yet.