ES-07 FIRE ESCAPE

Color: Black Material: Polyester Reflector: Yellow + Silver

• Flashlight hooks on the right, one radio pocket on left chest, two big patch pocket
• Elasticated braces with quick release buckles, two pockets both of trousers
• Drainage hole for all bottom pockets High collar fully lined, reinforced at elbow, knee.

Operating Pressure: 30MPa Maximum Flow: 1000L/min Alarm Pressure(MPa): 5.5±0.5 Alarm Sounds: ≥90db Tank Made: Carbon fiber Service Time: Up to 30 minutes APC Anti-fog Visor: Visual field up to 98%, good transparency, clear vision

• While use, the pressure within the respirator mask is always slightly higher than the external pressure

Parameters: 37 x 44 x 10 cm AC Power: 90 to 270VAC, 50Hz/60Hz Power Supply Rating: 3 Amps @ 24VDC Standby Detector: 4mA maximum Maximum Detector: 30 detectors Fault Relay Rating: 2A & 30VAC, resistive Alarm Relay Rating: 2A & 30VAC, resistive Features: Built-in alarm horn, easy to install and expand, long term usage, built-in imported chips for more stable and durable • Two, four, eight, sixteen zone style B (Class B) initiating device circuits (IDCs), all zones accept two-wire smoke detectors and any normally-open contact devices. • Two supervisory Input with DC12V output, ideal to connect security alarm devices. • Three general alarm, trouble and supervisory, form a relay output. • One, two, four built-in sound output, style Y (Class B) notification appliance (Signal) circuits (NACs), NACs may be programmed: Silenceable or non-silenceable. • 3.0 amps of total system power. Resettable DC24V & non- resettable DC24V output. • Zone input short circuit can be set to “Alarm” or “Fault” mode. • RS485 Communication port (optional). • Automatic/Manual mode can be programmed. • Disable/Enable control per zone (IDC) can be programmed. • Disable/Enable sound output(NACs) can be programmed.

Color: White Operating Voltage: DC:9V-35V Standby Current: 55uA Alarm Indication: Red LED Alarm current: 105±3dB Reset: Power off or auto reset Alarm Point: 57°C (135°F)

• SMT adopted, High stability, Low standby current, Anti-RFI & Anti-EMI 9-35VDC Voltage, Duel LED for 360 visual, Flashing LED power indicator