Code:
- ES-08A
ES-08A SILICONE MASK SINGLE
Gas Mask Type: Single filter mask
Sizes: One size fits all, adjustable
- • Combining human face features with design, nose cup tight fit with the face
- • Wide field of vision, the vision rate reaches above 91%
- • Inflaming retarding silicone for excellent soft, comfort and resistance to aging
- • Threaded fittings make gas mask easy to connect with canister or breathing hose
- • Four-point harness type
Description
Reviews (0)
Related products
ES-03 FIRE GLOVES YELLOW
Color: Yellow
Reflector: Yellow + Silver
Sizes: Free size
- Made of high-quality leather shell, moisture barrier, heat insulation and comfortable liner
- Using non-slip and high quality material
- Comfortable layer with flame-retardant properties fabrics
- Fireman can wear this gloves to protect hand, wrist and against scratches, cut
ES-10B OXYGEN TANK DOUBLE
Operating Pressure: 30MPa
Maximum Flow: 1000L/min
Alarm Pressure(MPa): 5.5±0.5
Alarm Sounds: ≥90db
Tank Made: Carbon fiber
Service Time: Up to 30 minutes
APC Anti-fog Visor: Visual field up to 98%, good transparency, clear vision
- While use, the pressure within the respirator mask is always slightly higher than the external pressure
ES-12 (2,4,8,16 ZONE) CONVENTIONAL FIRE ALARM PANEL
Parameters: 37 x 44 x 10 cm
AC Power: 90 to 270VAC, 50Hz/60Hz
Power Supply Rating: 3 Amps @ 24VDC
Standby Detector: 4mA maximum
Maximum Detector: 30 detectors
Fault Relay Rating: 2A & 30VAC, resistive
Alarm Relay Rating: 2A & 30VAC, resistive
Features: Built-in alarm horn, easy to install and expand, long term usage, built-in imported chips for more stable and durable
• Two, four, eight, sixteen zone style B (Class B) initiating device circuits (IDCs), all zones accept two-wire smoke detectors and any normally-open contact devices.
• Two supervisory Input with DC12V output, ideal to connect security alarm devices.
• Three general alarm, trouble and supervisory, form a relay output.
• One, two, four built-in sound output, style Y (Class B) notification appliance (Signal) circuits (NACs), NACs may be programmed: Silenceable or non-silenceable.
• 3.0 amps of total system power. Resettable DC24V & non- resettable DC24V output.
• Zone input short circuit can be set to “Alarm” or “Fault” mode.
• RS485 Communication port (optional).
• Automatic/Manual mode can be programmed.
• Disable/Enable control per zone (IDC) can be programmed.
• Disable/Enable sound output(NACs) can be programmed.
ES-21 HEAT ALARM
Color: White
Operating Voltage: DC:9V-35V
Standby Current: 55uA
Alarm Indication: Red LED
Alarm current: 105±3dB
Reset: Power off or auto reset
Alarm Point: 57°C (135°F)
- SMT adopted, High stability, Low standby current, Anti-RFI & Anti-EMI 9-35VDC Voltage, Duel LED for 360 visual, Flashing LED power indicator
ES-30 FIRE PROOF SPRINKLER
Color: Orange
Material: Brass, chrome plating
Nominal Diameter(mm): S15DN or 20DN
Connecting Thread: R1/2 or R3/4
Temperature Rating: 68°C
Flow Rate: 80±4 or 115±6
Humidity Range: 95%
RH Response: Quick response
- Widely use in office, school, kitchen and warehouse, easy to install and use.
- Work by temperature sensitive
- Easy to install and use.
Reviews
There are no reviews yet.