Code:
- ES-11B
ES-11B FIRE BLANKET
Sizes: 1.2 x 1.2 (meter)
Material: 100% Fiberglass fabric
Service Temperature: Above 550°C
Thickness: 0.43mm
- It is widely used in corporation, supermarket, shipping, car and house etc, especially use in kitchen, hotel, recreation ground, gas station etc that can easy to be on fire area
Description
Reviews (0)
Related products
ES-02 FIRE GLOVES BLUE
Color: Blue
Reflector: Yellow + Silver
Sizes: Free size
- Ordinary fire gloves with flame-retardant, acid, heat-resistant
- Comfortable layer with flame-retardant properties fabrics
- Fireman can wear this gloves to protect hand, wrist and against scratches, cut
- With reflective strap to protect yourself easily
ES-05 FIRE SUIT
Color: Black
Material: Polyester
Reflector: Yellow + Silver
- Flashlight hooks on the right, one radio pocket on left chest, two big patch pocket
- Elasticated braces with quick release buckles, two pockets both of trousers
- Drainage hole for all bottom pockets High collar fully lined, reinforced at elbow, knee.
ES-08A SILICONE MASK SINGLE
Gas Mask Type: Single filter mask
Sizes: One size fits all, adjustable
- • Combining human face features with design, nose cup tight fit with the face
- • Wide field of vision, the vision rate reaches above 91%
- • Inflaming retarding silicone for excellent soft, comfort and resistance to aging
- • Threaded fittings make gas mask easy to connect with canister or breathing hose
- • Four-point harness type
ES-12 (2,4,8,16 ZONE) CONVENTIONAL FIRE ALARM PANEL
Parameters: 37 x 44 x 10 cm
AC Power: 90 to 270VAC, 50Hz/60Hz
Power Supply Rating: 3 Amps @ 24VDC
Standby Detector: 4mA maximum
Maximum Detector: 30 detectors
Fault Relay Rating: 2A & 30VAC, resistive
Alarm Relay Rating: 2A & 30VAC, resistive
Features: Built-in alarm horn, easy to install and expand, long term usage, built-in imported chips for more stable and durable
• Two, four, eight, sixteen zone style B (Class B) initiating device circuits (IDCs), all zones accept two-wire smoke detectors and any normally-open contact devices.
• Two supervisory Input with DC12V output, ideal to connect security alarm devices.
• Three general alarm, trouble and supervisory, form a relay output.
• One, two, four built-in sound output, style Y (Class B) notification appliance (Signal) circuits (NACs), NACs may be programmed: Silenceable or non-silenceable.
• 3.0 amps of total system power. Resettable DC24V & non- resettable DC24V output.
• Zone input short circuit can be set to “Alarm” or “Fault” mode.
• RS485 Communication port (optional).
• Automatic/Manual mode can be programmed.
• Disable/Enable control per zone (IDC) can be programmed.
• Disable/Enable sound output(NACs) can be programmed.
ES-20 SMOKE DETECTOR SD-604PC
Color: White
Operating Voltage: DC:9V-35V
Standby Current: 55uA
Alarm Indication: Red LED
Alarm Current: 105±3dB
Reset: Power off or auto reset
Sensitivity: 0.5db/m
- SMT adopted, High stability, Low standby current, Anti-RFI & Anti-EMI 9-35VDC Voltage, Duel LED for 360 visual, Flashing LED power indicator
Reviews
There are no reviews yet.