-
Material: Polyester Webbing
-
Maximum Capacity: 5 tons
-
Hook: Metal
-
Width: 5 cm
-
Length: 10 meters
-
Weight: 2.40 kg
Product
DS-18 BHH WITH BACK SUPPORT
Color: Yellow + Green
Material: 45mm Polyester webbing
D-Ring Strength: 22.2 kN
Buckle Strength: 22.2 kN
Stitching Rope: Extra strength
Safe Work Load: 800kg
Break Work Load: 1,500kg
Maximum Safe Drop: 1.8 Meters
Features: 3 adjustable point harness, 1 anti-falling D-Ring on the back, 2 D-Rings on the waist for positioning
DS-19 WEIYA CLOTH
DS-20 CARABINER
DS-21 BIG HOOK
DS-25 RACHET TIE DOWN
DS-27 BACK SUPPORT
DS-31 YELLOW HARNESS DOUBLE LANYARD BIG HOOK
ES-01 FIRE BOOTS
ES-02 FIRE GLOVES BLUE
Color: Blue
Reflector: Yellow + Silver
Sizes: Free size
- Ordinary fire gloves with flame-retardant, acid, heat-resistant
- Comfortable layer with flame-retardant properties fabrics
- Fireman can wear this gloves to protect hand, wrist and against scratches, cut
- With reflective strap to protect yourself easily
ES-03 FIRE GLOVES YELLOW
Color: Yellow
Reflector: Yellow + Silver
Sizes: Free size
- Made of high-quality leather shell, moisture barrier, heat insulation and comfortable liner
- Using non-slip and high quality material
- Comfortable layer with flame-retardant properties fabrics
- Fireman can wear this gloves to protect hand, wrist and against scratches, cut
ES-04 FIRE HELMET
ES-05 FIRE SUIT
Color: Black
Material: Polyester
Reflector: Yellow + Silver
- Flashlight hooks on the right, one radio pocket on left chest, two big patch pocket
- Elasticated braces with quick release buckles, two pockets both of trousers
- Drainage hole for all bottom pockets High collar fully lined, reinforced at elbow, knee.
ES-06AUTO FIRE OFF
Color: Orange
Weight: 1.3 kgs type
Out-Diameter: 18cm
Nude Weight: 1.3+ / -0.5ks
Alarm signal: 120 dB (Impulse Noise)
Activation time: 3-5 Seconds
Effective Extinguish Area: 3 cubic meter (enclosed space)
Period of Validity: 5years
Features: Simple, convenient and easy to operate
Alarm signal: 120 dB (Impulse Noise)
ES-07 FIRE ESCAPE
ES-08A SILICONE MASK SINGLE
Gas Mask Type: Single filter mask
Sizes: One size fits all, adjustable
- • Combining human face features with design, nose cup tight fit with the face
- • Wide field of vision, the vision rate reaches above 91%
- • Inflaming retarding silicone for excellent soft, comfort and resistance to aging
- • Threaded fittings make gas mask easy to connect with canister or breathing hose
- • Four-point harness type
ES-08B SILICONE MASK DOUBLE
Gas Mask Type: Double filter mask
Sizes: One size fits all, adjustable
- Combining human face features with design, nose cup tight fit with the face
- Wide field of vision, the vision rate reaches above 91%
- Inflaming retarding silicone for excellent soft, comfort and resistance to aging
- Threaded fittings make gas mask easy to connect with canister or breathing hose
- Four-point harness type
ES-10A OXYGEN TANK SINGLE
Operating Pressure: 30MPa
Maximum Flow: 1000L/min
Alarm Pressure(MPa): 5.5±0.5
Alarm Sounds: ≥90db
Tank Made: Carbon fiber
Service Time: Up to 30 minutes
APC Anti-fog Visor: Visual field up to 98%, good transparency, clear vision
- While use, the pressure within the respirator mask is always slightly higher than the external pressure
ES-10B OXYGEN TANK DOUBLE
Operating Pressure: 30MPa
Maximum Flow: 1000L/min
Alarm Pressure(MPa): 5.5±0.5
Alarm Sounds: ≥90db
Tank Made: Carbon fiber
Service Time: Up to 30 minutes
APC Anti-fog Visor: Visual field up to 98%, good transparency, clear vision
- While use, the pressure within the respirator mask is always slightly higher than the external pressure
ES-11A FIRE BLANKET
ES-11B FIRE BLANKET
ES-11C FIRE BLANKET
ES-11D FIRE BLANKET
ES-11E FIRE BLANKET
ES-12 (2,4,8,16 ZONE) CONVENTIONAL FIRE ALARM PANEL
Parameters: 37 x 44 x 10 cm
AC Power: 90 to 270VAC, 50Hz/60Hz
Power Supply Rating: 3 Amps @ 24VDC
Standby Detector: 4mA maximum
Maximum Detector: 30 detectors
Fault Relay Rating: 2A & 30VAC, resistive
Alarm Relay Rating: 2A & 30VAC, resistive
Features: Built-in alarm horn, easy to install and expand, long term usage, built-in imported chips for more stable and durable
• Two, four, eight, sixteen zone style B (Class B) initiating device circuits (IDCs), all zones accept two-wire smoke detectors and any normally-open contact devices.
• Two supervisory Input with DC12V output, ideal to connect security alarm devices.
• Three general alarm, trouble and supervisory, form a relay output.
• One, two, four built-in sound output, style Y (Class B) notification appliance (Signal) circuits (NACs), NACs may be programmed: Silenceable or non-silenceable.
• 3.0 amps of total system power. Resettable DC24V & non- resettable DC24V output.
• Zone input short circuit can be set to “Alarm” or “Fault” mode.
• RS485 Communication port (optional).
• Automatic/Manual mode can be programmed.
• Disable/Enable control per zone (IDC) can be programmed.
• Disable/Enable sound output(NACs) can be programmed.
ES-13 HANDLE ALARM
Color: Red
Material: ABS plastic
Sizes: 140 x 104 x 45 (mm)
Operating Voltage: 9-28VDC Volts
Weight: 220g
Operating Temperature Range: -10°C to 50°C (14F to 122F)
- The conventional manual call point designed for conventional fire alarm system for reporting fire or emergency condition by its push in/pull down
ES-14 A-B FIRE ALARM BELL
Color: Red
Material: Aluminum alloy
Sizes: 15cm (6 inch)
Sound Pressure: 96dB
Operating Current: 25mA
Rated Voltage: DC 12V/24V/AC 220V
Driving Way: Motor
- A fire alarm is an electronic sounder or a bell. The alarm makes a loud, high pitched sound to notify people that there is a fire in the building
ES-15 LED SIREN
ES-16 FIRE CALL POINT
ES-20 SMOKE DETECTOR SD-604PC
Color: White
Operating Voltage: DC:9V-35V
Standby Current: 55uA
Alarm Indication: Red LED
Alarm Current: 105±3dB
Reset: Power off or auto reset
Sensitivity: 0.5db/m
- SMT adopted, High stability, Low standby current, Anti-RFI & Anti-EMI 9-35VDC Voltage, Duel LED for 360 visual, Flashing LED power indicator